- How To Run Mojave On Unsupported Mac
- How To Get Mojave On Unsupported Mac
- Macos Mojave Patcher For Unsupported Macs
- Macos Mojave Patcher Tool
- Macos Mojave For Unsupported Macs Mac
- Dosdude1 Mojave Patcher
- Macos Mojave For Unsupported Macs Version
The procedure below will allow Macs or Hacks able to install High Sierra to also install Catalina or Mojave (eg SMBIOS MacPro5,1, iMac11,3, MacBook Pro7,1 which have been unsupported in macOS 10.14.x and 10.15beta) -credit to @ASentientBot's post. Install macOS Mojave on unsupported Mac Before going to upgrade there are two important points that you should know about that, the first one checks your Wifi compatibility, because some of Mac have Wifi which is unsupported in the macOS Mojave. And the second one is you need to disable the ACP before installing the macOS Mojave. This video, I demonstrate How to Install macOS 10.14 (Mojave) on unsupported IMac 2009. As of now, Mojave works almost perfectly on most recently droppe. Macos Mojave On Unsupported Mac This advisory describes the changes and steps administrators can take to deploy Mac Connector 1.14. The Mojave 10.14.1 update does NOT install properly on unsupported machines, and could result in an unbootable OS.
«12»Comments
- Hi William; Ref: The Mojave Patcher Tool for Unsupported Macs is available for download from DosDude. This is the same guy that did this for High Sierra, and has supplied a series of other hacks and workarounds for fans of older Apple hardware. The guy's name is dosdude1.
- In addition: i habe a very good experience with running High Sierra on two officially unsupported MBPs, one from 2011 and one from 2009. Also Mojave PB is Running pretty stable on another MBP - which is, however, officially supported. I will do the same like with HS, which is skipping the early versions of DosDude’s tool and hen go for it
- Yes, the High Sierra version for unsupported Macs is smooth on my upgraded 2008 unibody. I’ve had no problems running it, and the experience sure beats being stuck on El Capitan.
- So, is the UI really slow without Metal support?
- Re: 'One more thing. If you do use this patch tool to install macOS Mojave on your main Mac, please remember that you can still read AppleInsider on your iPhone if things go awry.'
Priceless. - I’m using DosDude’s High Sierra patcher on the 2008 MacBook Pro I use for live performance, and it runs flawlessly. It’s perky, too! I consider myself very much in his debt.
I’m definitely going to be making the step to Mojave. I wrote him a while back hoping he would be providing a new patcher, and it sure looks like he resolved the issues he mentioned he was having.
I won’t be installing the beta, but once the Gold Master release has been out for 2 or 3 weeks and the first round of fixes have been made, I’m going for it. I should note that I’ve got two much more recent desktop Macs I’ll be updating the old-fashioned, Apple-approved way… I would not recommend running the patcher on your primary lose-it-and-die computer. There’s too much at stake.
Still, everything’s gone smoothly on the High Sierra version. Kudos to DosDude! - Do not tell it outloud. Apple will make all effort to kill that tool to sell more new hardware. It made all effort on the past hardware to make almost impossible to install systems like Linux on their hardware to reuse it. Yes system that in basic form (an many times in competitive form of Ubuntu desktop) can be installed on almost anything you can find in PC scrap. I do not believe it was for perofrmance reasons purely. Also before we jump on conclusion that Apple modern solutions require hardware I have just found out from a freind who just left them that there is a lot to be desired in their system quality area... especially on Macs. Time to listen to expereinced engineers rather than having cocky programmers who do not understand where all it goes and how it always ends.
- While this article is informative, I think there is information you are leaving out.
I'd give proper attribution to conversation about Mojave on Unsupported Macs being an active discussion hosted by Dosdude on Macrumors.com. Yes, it's a competitor but much of the information needed to be successful about doing this patch is found in the pages and pages of discussion amongst the users as bugs are crushed and more machines are added to the compatibility (or partial compatibility) list. It's no different than when you attribute a store broken by another website or news outlet. Just referring to Dosdude's own download page doesn't get around that fact. - This is probably a good thing. I'm not sure I will venture to Mojave on my MacBook Pro 5,5 or iMac 12,2, though. I put Sierra on the MacBook Pro to keep it aligned with the iMac, and only because Logic X 10.4 demanded Sierra. I might run it on a test hard drive to see what it's like. Sierra works very well on my machine that Apple arbitrarily dumped.
Apple keeps shortening the support time. Logic's demand of Sierra or High Sierra was an annoyance to many Logic users.
This pressure to upgrade has been getting worse because of iOS devices and iOS has an incredibly annoying nag to upgrade. I'm not happy about Apple's choices and it makes it very difficult for their customers to maintain a functioning 'Apple ecosystem' unless they're wealthy enough to repeatedly re-buy effectively the same devices every two or three years. It didn't used to be the case that you had to be wealthy to be an Apple user (just judicious spending and saving), but Apple's ecosystem is exactly designed to encourage, or push, people into multiple Apple devices, and upgrade each one more often. This is bad for consumers and they're too arrogant and too big to notice this. Eventually it will lose them customers and they don't care to watch out for this at this time.
Granted, they did just take some action to possibly pull back on this a bit, with promoting iOS 12 as being faster on older devices (I've avoided iOS 11 but I might go to iOS 12). They need to do more of this, on all platforms. - I bet Windows 10 runs perfectly on Boot Camp on a 2008 Mac without any hacks at all.
Runs perfectly on a 2009 (Mac Pro), at least. And you can even use the most modern Boot Camp drivers by bypassing Apple’s in-Windows compatibility check.I bet Windows 10 runs perfectly on Boot Camp on a 2008 Mac without any hacks at all.- edited July 2018
While I appreciate MR holding the conversation, they didn't break this. When appropriate, we give other sites credit -- including MR. This is a complicated situation for both MR and us, with a history and discussion about it going for pages and pages.While this article is informative, I think there is information you are leaving out.
I'd give proper attribution to conversation about Mojave on Unsupported Macs being an active discussion hosted by Dosdude on Macrumors.com. Yes, it's a competitor but much of the information needed to be successful about doing this patch is found in the pages and pages of discussion amongst the users as bugs are crushed and more machines are added to the compatibility (or partial compatibility) list. It's no different than when you attribute a store broken by another website or news outlet. Just referring to Dosdude's own download page doesn't get around that fact.
Users are welcome to -- and should -- use Google to seek information on any workaround we publish, or to seek amplifying information on tips. - edited July 2018
No, because macOS bases the general UI on the process 'WindowServer', and there was a usefulSo, is the UI really slow without Metal support?
discovery that Apple has not rewritten this using Metal, just preferring to delete the OpenGL drivers
for ye olde 'unsupported' Macs instead. (So far, to Public Beta 3, anyway.)
Turns out the OpenGL drivers and other kernel extensions (kexts) can be re-animated from older macOS releases
with the requisite incantations.
There are some issues with hardware acceleration for certain machines which use AMD GPUs,
but for stuff like the antique 2010 17' MacBookPro6,1 using Nvidia 330M, or even a garden-variety
2008 MacBook5,1 using Geforce 9400M it runs great!
It's amazing that a 10-year-old machine like my 2.4GHz 2008 MacBook using the mighty Intel Core 2 Duo
(with user-replaceable SSD and maxed-out 8GB memory) can run the new release perfectly fine!
Naw, I use DuckDuckGo as my search engine.
While I appreciate MR holding the conversation, they didn't break this. When appropriate, we give other sites credit -- including MR. This is a complicated situation for both MR and us, with a history and discussion about it going for pages and pages.While this article is informative, I think there is information you are leaving out.
I'd give proper attribution to conversation about Mojave on Unsupported Macs being an active discussion hosted by Dosdude on Macrumors.com. Yes, it's a competitor but much of the information needed to be successful about doing this patch is found in the pages and pages of discussion amongst the users as bugs are crushed and more machines are added to the compatibility (or partial compatibility) list. It's no different than when you attribute a store broken by another website or news outlet. Just referring to Dosdude's own download page doesn't get around that fact.
Users are welcome to -- and should -- use Google to seek information on any workaround we publish, or to seek amplifying information on tips.- This type of thing is for enthusiasts only, i.e., people that enjoy computer troubleshooting. People that just blithely say 'it works great' aren't telling the truth.
It’s two clicks more than a regular install and it works perfectly. Don’t say things you don’t understand.This type of thing is for enthusiasts only, i.e., people that enjoy computer troubleshooting. People that just blithely say 'it works great' aren't telling the truth.- edited July 2018
Cool, Good to know I have a spare old 2010 15' i7 MBP complete with SSD internal and maxed out RAM I thought was soon to be a doorstop. As the Boot-Camp work around that is fantastic, I can use it as another opensim server now
Runs perfectly on a 2009 (Mac Pro), at least. And you can even use the most modern Boot Camp drivers by bypassing Apple’s in-Windows compatibility check.I bet Windows 10 runs perfectly on Boot Camp on a 2008 Mac without any hacks at all.
Dude, I have a machine that can't run Mojave, it's from 2011. That is not a short time for software updates. Does Windows run on some really old hardware? Sure but Apple can't be expected to keep your computer supported for more than 8 years. Now I might try to run Mojave on my old MacBook since I'm running it as a torrent server and heck why not. But the only thing I was pissed off about with the update was that there weren't compelling machines to upgrade to for people who's machines were at the end of being supported. Hopefully they'll have the whole line up upgraded in the fall. If you think about it the original iMac G3 was only supported for something like 4ish years, I remember because by the time I bought my new iBook my iMac was considered ancient.This is probably a good thing. I'm not sure I will venture to Mojave on my MacBook Pro 5,5 or iMac 12,2, though. I put Sierra on the MacBook Pro to keep it aligned with the iMac, and only because Logic X 10.4 demanded Sierra. I might run it on a test hard drive to see what it's like. Sierra works very well on my machine that Apple arbitrarily dumped.
Apple keeps shortening the support time. Logic's demand of Sierra or High Sierra was an annoyance to many Logic users.
This pressure to upgrade has been getting worse because of iOS devices and iOS has an incredibly annoying nag to upgrade. I'm not happy about Apple's choices and it makes it very difficult for their customers to maintain a functioning 'Apple ecosystem' unless they're wealthy enough to repeatedly re-buy effectively the same devices every two or three years. It didn't used to be the case that you had to be wealthy to be an Apple user (just judicious spending and saving), but Apple's ecosystem is exactly designed to encourage, or push, people into multiple Apple devices, and upgrade each one more often. This is bad for consumers and they're too arrogant and too big to notice this. Eventually it will lose them customers and they don't care to watch out for this at this time.
Granted, they did just take some action to possibly pull back on this a bit, with promoting iOS 12 as being faster on older devices (I've avoided iOS 11 but I might go to iOS 12). They need to do more of this, on all platforms.
...But the only thing I was pissed off about with the update was that there weren't compelling machines to upgrade to for people who's machines were at the end of being supported. Hopefully they'll have the whole line up upgraded in the fall...This is probably a good thing. I'm not sure I will venture to Mojave on my MacBook Pro 5,5 or iMac 12,2, though. I put Sierra on the MacBook Pro to keep it aligned with the iMac, and only because Logic X 10.4 demanded Sierra. I might run it on a test hard drive to see what it's like. Sierra works very well on my machine that Apple arbitrarily dumped.
Apple keeps shortening the support time. Logic's demand of Sierra or High Sierra was an annoyance to many Logic users.
This pressure to upgrade has been getting worse because of iOS devices and iOS has an incredibly annoying nag to upgrade. I'm not happy about Apple's choices and it makes it very difficult for their customers to maintain a functioning 'Apple ecosystem' unless they're wealthy enough to repeatedly re-buy effectively the same devices every two or three years. It didn't used to be the case that you had to be wealthy to be an Apple user (just judicious spending and saving), but Apple's ecosystem is exactly designed to encourage, or push, people into multiple Apple devices, and upgrade each one more often. This is bad for consumers and they're too arrogant and too big to notice this. Eventually it will lose them customers and they don't care to watch out for this at this time.
Granted, they did just take some action to possibly pull back on this a bit, with promoting iOS 12 as being faster on older devices (I've avoided iOS 11 but I might go to iOS 12). They need to do more of this, on all platforms.
This!
Ending support for my 2011 iMac will probably eventually put me on a new Windows machine. It’ll start with Boot Camp, and then, at some point, I’ll want to stay with what “I know” but will need something faster.
As long as it has a Metal-compatible GPU (or you use dosdude’s “add in the old drivers” utility), it should work perfectly.Dude, I have a machine that can't run Mojave, it's from 2011.But the only thing I was pissed off about with the update was that there weren't compelling machines to upgrade to for people who's machines were at the end of being supported.Wait, what do you mean here?
In this article, we will determine if your old Mac can still be updated to newer versions of macOS.
Most Apple devices have an average 5-year support lifespan, which means that they will receive software updates, including bug fixes, patches, and security updates over those years.
Until then, macOS and iOS devices are considered “unsupported” by Apple due to forced obsolescence of hardware.
In other words, Apple stopped supporting all its macOS and iOS devices with continuous software and operating system updates due to hardware limitations.
This is because as hardware ages, it cannot dully support newer programs that might be too advanced for its capability.
Starting with Mojave Apple did not allow older Macs to upgrade to newer macOS versions. With every new macOS release the minimum year of Mac hardware increases. While most pre-2012 officially cannot be upgraded, there are unofficial workarounds for older Macs.
According to Apple, macOS Mojave supports:
- MacBook (Early 2015 or newer)
- MacBook Air (Mid 2012 or newer)
- MacBook Pro (Mid 2012 or newer)
- Mac mini (Late 2012 or newer)
- iMac (Late 2012 or newer)
- iMac Pro (2017)
- Mac Pro (Late 2013; Mid 2010 and Mid 2012 models)
According to Apple, macOS Catalina supports:
- MacBook (Early 2015 or newer)
- MacBook Air (Mid 2012 or newer)
- MacBook Pro (Mid 2012 or newer)
- Mac mini (Late 2012 or newer)
- iMac (Late 2012 or newer)
- iMac Pro (2017)
- Mac Pro (Late 2013 or newer)
Lastly, macOS Big Sur supports these devices:
- MacBook introduced in 2015 or later
- MacBook Air introduced in 2013 or later
- MacBook Pro introduced in late 2013 or later
- Mac mini introduced in 2014 or later
- iMac introduced in 2014 or later
- iMac Pro
- Mac Pro introduced in 2013 or later
If you see that your Mac is older than mentioned above, you definitely can’t expect to update your device to newer macOS versions.
Does Apple still support your version of macOS?
Usually, macOS automatically updates itself once the software is rolled out to its users. But first, know which version of macOS your device is running.
To know which version of macOS you are using, click the Apple icon at the top left corner of your screen and select About This Mac.
A Window will appear showing the version of macOS running on your device.
Note: If you are using an older device, it will show that your system is called “OS X” (OS X 10.11 El Capitan is the latest) instead of “macOS” (starting from macOS 10.12 Sierra onwards).
Updating your Mac to the newest macOS versions
If Apple still supports your device, you can directly update your device from the About This Mac window by clicking “Software Update.”
This will download the latest version of macOS to your device. Alternatively, you can type “macOS <version>” on the App Store if you wish to install a specific macOS version on your device.
After the download completes, the installer will open automatically. Click Continue and follow the instructions and let it complete the process.
Make sure not to use your computer, put it to sleep, or close it slid during the installation process. Doing so may corrupt the installation files and your current system files.
Why Mac Won’t Update to Newer Versions of macOS
Usual installation problems across different versions of macOS could be:
- Incompatible Mac
- The update couldn’t be downloaded
- Insufficient storage space
Problem 1: Incompatible Mac
As stated before, newer versions of macOS do not support really old Mac devices. Always check if your device is supported by Mojave, Catalina, Big Sur, or other macOS versions before updating.
Problem 2: The update couldn’t be downloaded
How To Run Mojave On Unsupported Mac
In downloading the macOS update, you might receive an error message that says, “Installation of macOS could not continue. Installation requires downloading important content. That content can’t be downloaded at this time. Try again later.”
Other users might find that the download progress bar might be stuck.
If you encounter these problems, the culprit might be a network error. Try these fixes:
- Check your router if you have a stable internet connection and not experiencing a network hiccup.
- If you are using a wireless internet connection, try switching to an Ethernet cable connection to ensure that the download speed is consistent.
- Lastly, check Apple’s System Status and see if The Apple Serve is live.
If the problem persists, there may be several people downloading the update at the same time. This most likely happens at the early release of the update so try downloading the update at non-peak times.
Problem 3: Insufficient storage space
In most cases, download files abruptly stop downloading if there is not enough space left in the computer, causing partial installation files to be stored in your system.
To fix this problem:
- Look for a file name called “Install macOS <version number of what you are trying to install>“. For example, “Install macOS 10.14” for Mojave, “Install macOS 10.15” for Catalina, and “macOS 11.2” for Big Sur.
- Delete the file.
- Reboot and make sure to free up more than the necessary space required for the download file.
- Download the file again.
Your device should automatically start the installation once it’s done. Otherwise, open the folder where you saved the update file and double-click it to prompt the installation.
Installing Newer Versions of macOS in Safe Mode
Some applications, startup items, or extensions might interfere with the installation process, causing it to terminate or not run the update at all.
To ensure that no other programs are causing this problem, you can install Mojave, Catalina, or Big Sur in Safe Mode.
To restart your device in Safe Mode:
- Shut down your Mac.
- Wait for 15 seconds until the device fully shuts down.
- Press the power button and press Shift as soon as your Mac starts up.
- Release the Shift key when the Apple logo appears.
From there, proceed to install the new version of the macOS you wish to upgrade to.
Do You Need to Update/Upgrade Your Mac?
Short answer: yes.
You need to update your macOS to the newest version mainly because of the security updates and performance fixes that come along with it. This ensures that your device is less vulnerable to hacks and more stable as new features are being released by Apple.
However, if you’re using a Mac that’s older than the Mac devices listed above, you might want to consider not upgrading to newer macOS versions like Mojave or Catalina.
Older devices might suffer compatibility issues with older applications once you decide to upgrade your Mac to newer macOS versions.
Especially in macOS Catalina, where Apple fully transitioned to 64-bit Mac applications, dropping full support for older 32-bit applications.
On the other hand, macOS Mojave (10.14) is the last macOS version that supports 32-bit applications.
For old Mac owners, this could be the closest to the newest macOS version that they can upgrade to while keeping most of their programs working on their device.
Installing New macOS Versions on Unsupported Macs
Even if your Mac is too old to update, it does not mean that it is impossible to install newer macOS versions to your old Mac.
You can actually install Mojave, Catalina, or even Big Sur to older unsupported Mac devices through a workaround patch.
However, keep in mind that you will experience performance issues in doing so. In most cases, you might lose data, so it is strongly recommended to create a full backup before you try these methods.
How to install macOS Mojave on Unsupported Macs
Step 1: Download macOS Mojave Patch Tool by DosDude1 from this link.
Note: NOT ALL old Mac devices are supported by this patch Tool so make sure that your device is listed under the “Requirements” section first before proceeding with the download
Step 2: For this step, you will need a 16 GB or higher USB drive and format it using Disk Utility. Go to: Spotlight (press Command + spacebar) > type “Disk Utility” and select it once it shows up.
From here, put any name you want for your USB drive, Format the USB Drive as OS X Extended (Journaled), and click Erase
Step 3: Once you finish downloading macOS Mojave Patch Tool, open it (Double-click or Right-click > Open). Click Tools >Mojave installer application to download the macOS Mojave installation file.
Note: If you get an error that the Mojave Tool does not support your Mac, you are out of luck because you will not be able to upgrade your Mac from this point.
Step 4: Once the Mojave installer has finished downloading, click the Mojave icon in the Patch Tool window. Select your USB drive on the drop-down menu and click Start Operation.
Step 5: Once completed, eject your USB drive and shut down your Mac. Do not remove your USB drive and wait for 15 seconds or until your device completely powers off.
Then, press the power button and hold down the Option key on the keyboard when you see the startup screen. You will see a series of drives on the screen and select your USB drive.
Note: If you wish to do a clean install, follow Steps 6 to 7. Otherwise, skip to step 8.
Step 6: Open Disk Utility (Menu Bar > Disk Utility).
Step 7: Click on your system drive and click Erase to format your drive. Select Mac OS Extended (Journaled) or APFS and name your drive. After you successfully formatted your drive, close the Disk Utility window.
Step 8: You can proceed to install macOS on your system hard drive. Select where you want to install macOS and click Continue.
Step 9: Let the installation finish, and once it is completed, reboot back into the installer drive (same as Step 5). Click “macOS Post Install” in the side menu or the drop-down menu in Utilities.
Step 10: In the window, select the model of your Mac. The program will automatically select which patches are needed for your device, but you can also select which patches you want to include.
Step 11: Select the volume where you installed macOS Mojave and click Patch. Once it is finished, click Reboot.
Note: If the macOS failed to work properly after reboot, reboot once again into the installer drive and re-run the post installer patch. Select “Force Cache Rebuild” before rebooting.
Now, you should have a working macOS Mojave installed on your unsupported Mac.
How to install Catalina on an Unsupported Mac
Step 1: Download “macOS Catalina Patcher” from this link
Note: NOT ALL old Mac devices are supported by this patch tool so make sure that your device is listed under the “System Compatibility” section on the site above before proceeding with the download.
Step 2: You will need a USB drive with at least 8 GB of storage space to store the Catalina installation file. Plug it into your computer.
Step 3: Go to Spotlight (press Command + spacebar) > type “Disk Utility” and select it once it shows up.
From here, put any name you want for your USB drive, Format the USB Drive as OS X Extended (Journaled), and click Erase.
Step 4: Once the download finishes, open the Catalina Patcher application.
Step 5: Click Continue. Select “Download a Copy” if you do not have a copy of the latest Catalina installer. Otherwise, you can select your Catalina installer file by clicking “Browse for a copy.” Generally, the file is almost 8 GB.
Step 6: After the installation file has finished downloading or selected, click, Continue.
Step 7: Select “Create a bootable installer” from the three options.
Step 8: Select the USB drive you just formatted create a bootable drive. Once finished, shut down your Mac.
Step 9: Do not remove your USB drive and wait for 15 seconds or until your device completely powers off. Then, press the power button and hold down the Option key on the keyboard when you see the startup screen. You will see a series of drives on the screen and select your USB drive.
Note: If you wish to do a clean install, follow Steps 10 to 11. Otherwise, skip to step 14.
Step 10: This will take you to the macOS Utilities window. Open Disk Utility.
Step 11: Click on your system drive and click Erase to format your drive. Select APFS and name your drive. After you successfully formatted your drive, close the Disk Utility window and go back to the macOS Utilities window.
Step 12: Select “Reinstall macOS” under the macOS Utilities window. Wait for the program to finish the installation.
Step 13: Once the installation has finished, repeat step 9.
Step 14: Select “macOS Post Install” and continue. The program will automatically select all necessary patches to install on your device.
Step 15: Once the patches are applied, select “Force Cache Rebuild” and restart.
Once it reboots, you should have a working macOS Catalina on your unsupported Mac.
How to install Big Sur on an unsupported Mac
Step 1: Download the macOS Big Sur installation file from the App Store or click this link.
Step 2: Plugin a USB drive with at least 15 GB of space. This is where you will store the Big Sur installation file.
Step 3: Go to SpotlightSearch (press Command + spacebar) > type “Disk Utility” and select it once it shows up.
Step 4: Once Disk Utility opens, click Erase.
How To Get Mojave On Unsupported Mac
Step 5: Name the USB drive “MyVolume” and select OS X Extended (Journaled) under Format.
Step 6: Select “GUID Partition Map” as the Scheme and click Erase. Wait until Disk Utility fully sets up the drive. Once it is finished, click Done.
Step 7: Open Terminal (Command + spacebar > type “Terminal”).
Step 8: Copy the following to the Terminal:
Step 9: Press Enter/Return. The terminal will ask for a password. Type your user login password and press Enter.
Step 10: The terminal will prompt you with a warning that says that it is about to erase the drive. Make sure to backup all important files in this drive before continuing. Once you saved all the files you need, the Terminal will show a text that says, “If you wish to continue, type (Y) then press return:” Do as it says and wait for the process to complete.
Macos Mojave Patcher For Unsupported Macs
Step 11: Restart your Mac into the Startup Manager by holding Options on the keyboard while it is booting up.
Step 12: Once you are in the Startup Manager, select your USB drive “MyVolume” as the startup disk. Your Mac will enter in Recovery Mode and show you the macOS Utilities window.
Note: If you wish to do a clean install, follow Steps 13 to 14. Otherwise, skip to step 14.
Macos Mojave Patcher Tool
Step 12: Open Disk Utility.
Step 13: Click on your system drive and click Erase to format your drive. Select APFS and name your drive. After you successfully formatted your drive, close the Disk Utility window and go back to the macOS Utilities window.
Macos Mojave For Unsupported Macs Mac
Step 14: Click Install/Reinstall macOS and click Continue. This will install macOS Big Sur on your device. Please wait for it to complete and reboot.
Dosdude1 Mojave Patcher
Macos Mojave For Unsupported Macs Version
Once it reboots, you can now use macOS Big Sur on your unsupported Mac.
Photo credit: ©canva.com