Os X El Capitan 10.11 Download

Click on the download link that shows up, and enter the personal redemption code given to you. Open the downloaded Mac OS X El Capitan software and preview the file in the Applications folder. Click “Continue” and then select “Agree”. Click on “Install” and then enter your admin password.

  1. El Capitan 10.11.6 is now released as the latest version of Download El Capitan. For OS X El Capitan users this update is recommended. The upgrade to OS X El Capitan v10.11.6 enhances your Mac's reliability, performance and protection and is advised for all users. Solves a problem that can prevent parental control accounts from saving settings.
  2. Install Mac OS X 10.11 El Capitan in VMWare. All Tutorials; Java. Java Basic; Java Collections Framework. 2- Download Mac OS X 10.11 Download Mac OS X.

Warning: Please follow these instructions at your own risk. I am not responsible for any damage or information loss that could result from following this guide. Also, note that installing OS X on PC is illegal. Please buy a real Mac if you're satisfied with your Hackintosh. This guide is for evaluation purposes only.

Requirements

  • An Intel-based PC with UEFI bios
  • A USB flash drive with at least 16GB capacity
  • A dedicated hard drive (SSD highly recommended)
  • A computer running OS X (10.9 or later) for preparing the installation USB flash drive

I chose to avoid the UniBeast installer (by Tonymacx86) because of its commercialized nature, as described here. Here is a vanilla guide to installing El Capitan on your PC!

Preparing the USB Installation Drive

First things first. We need to prepare a USB thumb drive that will contain the installation files as well as the bootloader and custom kexts for our specific Hackintosh build.

Download El Capitan from the Mac App Store

Head over to your existing OS X environment running 10.9 or later and open the Mac App Store.

Search for 'El Capitan' and click Download. The download is completely free if you're running OS X 10.9+.

Wait for the download to finish (this could take some time).

Format the USB Drive

Open Disk Utility in Applications/Utilities and locate your USB device. Make sure you've backed up anything important on that drive as it will be erased forever.

Select it, and then on the right, click the partition tab.

  1. Click Curent Layout and change it to 1 Partition.
  2. Set the Name to USB.
  3. Set the Format to Mac OS Extended (Journaled).
  4. Click Options and select GUID Partition Table.

Click Apply to format the drive.

Copy the Installation Files to the USB Drive

Now that we've downloaded the installation files from the Mac App Store and formatted our USB drive, let's copy the installation files to it.

Run the following command in the Terminal (Applications/Utilities):

The command will run a script inside the Install OS X El Capitan application that will copy the installation files to the USB drive.

This process takes about 15 minutes. Go out for a quick run, or a hamburger, or both. When you come back, it should have finished.

Installing a Bootloader

If you tried to boot from the USB drive as is after the previous step on a PC, it wouldn't work. We need a bootloader that makes it possible to boot OS X on x86 and x86_64 PCs.

There are 3 popular bootloaders to choose from.

  • Clover
  • Chameleon
  • Chimera

I went with Clover as it seems to be the most popular choice among other El Capitan installers, mostly for the following reasons:

Clover is an open-source EFI-based bootloader created on Apr 4, 2011. It has a totally different approach from Chameleon and Chimera. It can emulate the EFI portion present on real Macs and boot the OS from there instead of using the regular legacy BIOS approach used by Chameleon and Chimera. For many, Clover is considered the next-gen bootloader and soon it will become the only choice since BIOS in being replaced by UEFI in every new motherboard. One big feature of Clover is that iMessage, iCloud, the Mac App Store works along with Find My Mac, Back To My Mac and FileVault since Clover can use the EFI partition. (Read more)

Install Clover on Your USB Drive

Installing Clover on your USB drive is relatively easy. It involves running an installation wizard and selecting some options.

Download the latest Clover installer from here.

  1. Run the installer.
  2. Click Continue twice.
  3. Click Change Install Location and set it to your formatted USB drive.
  4. Click Customize and check the following options:
    • [x] Install for UEFI booting only
    • [x] Install Clover in the ESP
    • [ ] Drivers64UEFI
      • [x] OsxAptioFixDrv-64 - fixes memory map created by AMI Aptio EFI. Booting OS X is impossible otherwise.
  1. Click Install and wait for the installation to finish. It shouldn't take more than a minute.
Copy Essential Kexts to the USB Drive

Next, we'll need to copy some kexts (kernal extensions, similar to drivers on Windows) to the USB drive.

  • FakeSMC.kext - open source SMC device driver/emulator developed by netkas. Tricks OS X into thinking it's installed on Apple hardware. Absolutely required for Hackintosh installation.
  • NullCPUPowerManagement.kext - disables AppleIntelCPUPowerManagement.kext which may cause kernel panics when you try to boot from the USB drive. It's optional, copy it only if you get an AppleIntelCPUPowerManagement-related kernel panic.
  • ApplePS2Controller.kext and AppleACPIPS2Nub.kext - adds support for PS2 devices (such as PS2 keyboard/mouse). They're optional, copy them only if you still use PS2 devices.

Free Download Of Os X 10.11 El Capitan

Download these files from here and copy them to the EFI mounted volume at /EFI/Clover/kexts/10.11/.

Now that the installation USB drive is ready, let's install OS X El Capitan!

Boot from the USB Drive

Restart your computer and boot from the USB drive (Press Esc/F8/Del to access the boot selection menu).

Use the arrow keys to select Boot OS X Install from Install OS X El Capitan (It should be selected by default). Press the spacebar and select Boot Mac OS X in verbose mode. Verbose mode means that you'll be able to see exactly what's going on under the hood as OS X attempts to boot up its installer. You'll be able to see the exact error message if booting fails.

Press Enter and cross your fingers. Clover will now boot the installer from your USB drive. This could take some time, in my case, it takes around 5 minutes (Don't worry -- the startup time is around 5 seconds after installing on an SSD).

Did it fail?

It's more than likely that the boot will fail. Don't panic (ha-ha), as kernel panics usually mean that you forgot to copy an essential kext to the EFI partition. Look up the exact error you're getting before the boot log comes to an end and search Google for a solution.

Capitan

Once you find an additional kext that your system needs, you'd attempt to copy it to the EFI volume, only to discover that it's gone! Not to worry, it's just unmounted and hidden. Follow this guide to mount the hidden partition, and then, follow the Copy Essential Kexts section above to copy it to the USB drive's EFI partition.

Format the Target Hard Drive

Once the installation wizard boots, the next step is to prepare the hard drive that you want to install OS X on.

Click Continue, followed by Disk Utility.

Select the target drive to install to (not the USB drive!) and click the Erase button. Make sure to back up anything important on that drive, as it will be deleted forever.

  1. Set the Name to El Capitan.
  2. Set the Format to OS X Extended (Journaled).
  3. Set the Scheme to GUID Partition Map.

Click Erase to format the drive.

Install OS X to the Target Drive

Exit the Disk Utility and click Install OS X.

Click Show All Disks and select the drive you just formatted to install OS X on it. Finally, click Install.

The process takes about 25 minutes. Be patient. For me, it hung at the end ('1 second remaining') for around 5 minutes. Don't be tempted to reset or cancel the installation.

When that's done, the system will reboot. Make sure to boot from the USB device again, and select Boot OS X Install from Install OS X El Capitan once again, in verbose mode. The installation is a two-part process that continues once you re-boot into the USB drive.

Finally, after about 25 more minutes, OS X El Capitan should be successfully installed on the target drive.

Boot into El Capitan via the USB Device

Os X El Capitan 10.11 Download

After the second reboot, boot from the USB device once again, but this time, select Boot OS X from El Capitan, and select verbose mode.

Press Enter and cross your fingers again. If all goes well, you'll be presented with the setup wizard:

Take a minute to set up your new Hackintosh. Once you're done, there are a few things you need to do to finish off the installation.

Reinstall Clover on the Hackintosh Drive

In the previous step, we used Clover on our USB drive to boot our Hackintosh. This is fine, but most of us aren't going to keep that USB drive plugged in forever. Let's make it possible to boot El Capitan independently by reinstalling Clover on it.

Go back up to the Install Clover on Your USB Drive section and follow the steps again, but this time, select your El Capitan volume instead of the USB drive.

Once again, copy the essential kexts to the EFI partition that shows up after installing Clover.

Capitan

Finally, make sure to add Clover EFI boot options which is possible by pressing Clover Boot Options in the Clover boot window (if there are 2 boot options -- find the one for your SATA drive). I literally spent 3 hours figuring out why Clover would not boot when I disconnected the USB drive before I figured out that I need to manually add the EFI boot options.

Now you'll be able to boot directly from the El Capitan hard drive, as it should be!

Audio and Networking

If you're lucky, audio and networking will work right out of the box. If not, you're on your own from here. You'll need to research your exact hardware (by using System Information in Applications/Utilities) and searching Google to find the right kext or installer to make it work on El Capitan.

Clover Themes

The default Clover theme is pretty ugly (no offense). Check out this theme database to improve Clover's appearance.

This is YosemiteLogin by xenatt:

Enjoy!

That's it! Enjoy your new Hackintosh, and if you absolutely love it, consider buying a Mac!

On its release, Mac OS X El Capitan was met with positive critical reception from both critics and the public. These reviews were seen to be much more favorable than the ones received by macOS X Yosemite. It was particularly praised for its improved performance, excellent language support, new Spotlight features, and enhanced security. Additions to old features like Maps and Mail were also received favorably.

At the same time, criticism was thrown at the frequent page crashes and the shutting down of the Mac when it was restarted. The battery life was quite short and got exhausted easily. Compatibility problems with Word 2016 and the Safari browser’s failure to save cookies for certain websites were also noted issues.

Os X 10.11.4 Download

In spite of these slight hiccups, Mac OS X El Capitan turned out to be a great improvement over Mac OS X Yosemite like it was intended to be.

Productive Features of Mac OS Capitan 10.11

These are the features of Mac OS X El Capitan 10.11

  • Split View- This feature allows the user to split their screen into two and keep two apps open at the same time. This is a very handy feature that will help the user save time that they normally spend on constantly switching between apps.
  • Mission Control- This feature will display all of the user’s open windows at once which will greatly help them with their navigation. All open windows in open applications as well all open windows belonging to a particular application can be opened depending on the command that the user gives.
  • Enlarged cursor- If you are someone who finds it difficult to locate their cursor on the screen, this new feature is for you. By shaking the mouse slightly or moving your finger up and down on the trackpad, the cursor can be enlarged.
  • Spotlight- Spotlight is a pre-existing feature that allows users to search for whatever they require on their Mac. A lot of new improvements have been added to Spotlight on the Mac OS X El Capitan. Now, users can search for weather and sports updates as well as stock information using the feature. Natural language processing has been added to Spotlight which means that users will be able to search for what they need without extremely specific terminology.
  • Notes- Using this feature, the user can jot down anything that they need to remember or do. The Notes feature has received a few improvements in X El Capitan. Images and videos can now be added here and interactive checklists can also be created. The information that is present here can be synced across all of the user’s iOS devices.
  • Maps- This improved feature now grants users the ability to get directions to wherever they have to go as well the transportation that can get them there.
  • Pinning Tabs- Keeping many tabs open at the same time is something that can be confusing and messy for many. Sometimes, important tabs may get deleted accidentally along with the other ones. In order to avoid this, users can now pin their tabs. Doing this, they will be able to return to that tab easily(distinct pin icon) and it will not get deleted unless the user right-clicks it and chooses to delete it.
  • Swiping messages in the mail- Users can now swipe on the messages in their mail. If they have a mail that they want to mark as important, they can swipe to the right and if there is one that they want to delete, they can swipe to the left.
  • Metal- Metal is an API that will allow many new games to be playable on the Mac. This is the first macOS to receive this addition.
  • Muting noisy tabs- Having a tab which has a video playing without the user’s wish can be annoying to listen to. With the new mute feature, the user will be able to know which tab is causing the unwanted noise and they can mute it.
  • System Integrity Protection(SIP)- This is a new security feature that has been introduced in this macOS. It protects the sensitive contents of files from manipulation and processes from external unwanted interference.

Steps to download Mac OS X El Capitan 10.11 ISO/DMG files

These are the steps that have to be followed in order to download macOS X El Capitan 10.11:

Check if the Mac model is compatible with OS X El Capitan 10.11

Os X El Capitan 10.11 Download

The user’s Mac has to be compatible with OS X El Capitan 10.11. If this condition is not satisfied, the download will not be able to be done. The following models have been found to be compatible:

  • MacBook(2009 and onwards)
  • Mac Pro(2008 and onwards)
  • MacBook Air(2008 and onwards)
  • MacBook Pro(2007 and onwards)
  • Mac mini(2009 and onwards)
  • iMac(2007 and onwards)
  • Mac Pro(2008 and onwards)

In order to download Mac OS X El Capitan 10.11, the user’s Mac must have at least 2 GB of memory and 8.8 GB of available storage space.

Backup the system using Time Machine

The user can rest assured knowing that their important files can be properly backed up using Time Machine of Mac. They have to connect an external storage device to their Mac to which the files and data will be backed up. These can then be restored later from here whenever the user needs them again.

Download Mac Os X El Capitan 10.11 Iso

Download Mac OS X El Capitan 10.11

The user can download the OS from the App Store.

Install Mac OS X El Capitan 10.11

When the download has been completed, the user should go to their Applications folder which will contain the downloaded OS. It should be double-clicked and then the installation process can then begin. The user should follow whatever instructions are displayed and wait patiently for the installation to get done. The Mac should be active during this time and it is advised to do this process in the evening so that the installation can take place overnight.

These are the steps that have to be followed to get the ISO file:

  • After the installation of X El Capitan has been completed, an image file can be found inside Applications.
Download mac os x el capitan 10.11

Appropriate commands have to be entered in the Terminal for the following steps:

  1. This file should be mounted to a directory
  2. A placeholder image should be created
  3. The newly created empty ISO file must be mounted
  4. A new mount point should be created using the necessary tool
  5. Files should be copied from the directory of the previously mounted image to this new directory(mount point)
  6. Unwanted files can be unmounted
  7. The ISO file should be converted to the required UDTO format

How to Download Mac OS X El Capitan 10.11 ISO

The macOS X El Capitan 10.11 ISO Image can be downloaded from the ISO site and could be run in the framework you need to build up the server in. Presently, the general execution of the framework absolutely relies on the manners by which you configure the system administrator settings.